5 $0.00

BOGE

Boge C10 L Screw Compressor 7.5kW

Boge C10 L Screw Compressor 7.5kW

C10 L Screw Compressor 7.5kW (10HP) Specification 

  • Make : BOGE
  • Model : C10 L Screw Compressor 7.5kW (10HP)
  • Subcategory : Small Screw Compressor

Description

Technical Data:
Effective free air delivery of complete unit measured according to ISO 1217 Part C 1,06 m³/min
at maximum compressor overpressure 10 bar

Main drive motor nominal power 7,50 kW

Protection type / Insulation class of the motor IP 55 / F

Operating voltage (compressor) 400 V / 50 Hz

Control voltage (compressor) 24 V AC / 24 V DC

Cooling air volume flow (compressor) 3000,00 m³/h

Suction or ambient temperature (min...max) +5...+45 °C

Compressed air outlet temperature above ambient temperature 9 K

Residual oil content in compressed air < 3 mg/m³


Unit sound pressure level (in accordance with DIN EN ISO 2151) 68 dB(A)

Width / Depth / Height 1171 / 599 / 595 mm

Compressed air connection (ball valve) G ¾

Weight 260,0 kg

$ 7,425.00


Category: BOGE

Other Info

  • Year: Available on Request
  • Status/Condition: As new
  • Width cm: Available on Request
  • Height cm: Available on Request
  • Total Kg: Available on Request

Pick Address
  • State: AU
Boge C15-LDR 11Kw Direct Drive - 15hp Screw Compressor

New Boge 10-20Hp Screw Compressor:

BOGE CLD 15-350 compressed air centre air cooled
Screw compressor and BOGE refrigerant compressed air dryer
mounted on a horizontal compressed air receiver

Complete and ready to connect, fully automatic operation, with CE approval stamp

– Compressor and motor directly coupled
– Electrical switch cabinet (IP 54) with star-delta contactor and pressure sensor
– Motor protection IP 55 with PTC thermistors
– All components are integral but still easily accessible from the outside
– All service parts are accessible from the front
– Compressor unit isolated from mechanical vibration
– Hermetically sealed BOGE suction regulator with integrated solenoid valve ensures no load
starting and safe operation of all moving parts
– Minimal internal pressure loss due to the BOGE air end with optimised screw profile
fitted directly into a compact module
– Constant low oil carry-over in all operating phases
due to efficient pre-separation in the integral compressed air-oil separator
– Easy change oil separator cartridge and high efficiency oil filter via common access lid
– Valveless oil circuit
– No condensate in the oil due to thermostatically controlled oil cooler
– Compressed air aftercooler for low compressed air outlet temperatures
– Economical operating mode selection due to BOGE control, regulation
and monitoring systems with micro processor control and individual fault message displays
– Constant compression temperature and pressure display
– Precise pressure adjustment via keypad
– Anti-freeze protection for compressors up to -10°C
– Surface coating in light blue, RAL 5012
– Compressed air receiver polished and painted for extended service life,
handhole as inspection opening, with CE symbol
– Receiver according to EEC-directive 2009/105, manufactured according to AD-regulations 2000, with CE symbol
– Manifold complete with all necessary receiver fittings like type tested
safety valve, pressure gauge, relief valve with threaded test point
Price Negotiable


Category: BOGE

Other Info

  • Year: 2012
  • Status/Condition: New
  • Width cm: Available on Request
  • Height cm: Available on Request
  • Total Kg: Available on Request

Pick Address
  • Region: Perth
  • State: AU
Boge S24-2 18.5kW Rotary Screw Compressor

Boge S24-2 18.5kW Rotary Screw Compressor 

18.5kW Rotary Screw Boge - Boge 25-40Hp Screw Compressor Specification 

  • Make : BOGE
  • Model : 18.5kW Rotary Screw Boge 
  • Subcategory : 25-40Hp Screw Compressor

Description

Make: BOGE
Model: S25-2
Kw: 18.5 (25 HP)
Capacity: 108 CFM 
Pressure: 8 BAR (116 psi) 
Hours : ONLY 560 Hrs

The German Built BOGE S24-2 has many great features, the most apealing of these are a Compact in design and Very Few hours. 
Easily servicable spin on filters. 
Mint Condition
Spares are available locally

$ 6,050.00


Category: BOGE

Other Info

  • Year: Available on Request
  • Status/Condition: 2nd Hand
  • Width cm: Available on Request
  • Height cm: Available on Request
  • Total Kg: Available on Request

Pick Address
  • Region: Perth
  • State: AU
Boge CLD7 5.5Kw 19cfm BOGE With Integrated Dryer Screw Compressor

Boge CLD7 5.5Kw 19cfm BOGE With Integrated Dryer Screw Compressor

5.5Kw 19cfm BOGE With Intergrated Dryer Specification 

  • Make : BOGE
  • Model : 5.5Kw 19cfm BOGE With Intergrated Dryer 
  • Subcategory : Small Screw Compressor

Description

BOGE CLD 7-270 compressed air centre air cooled
Screw compressor and BOGE refrigerant compressed air dryer
mounted on a horizontal compressed air receiver

Complete and ready to connect, fully automatic operation, with CE approval stamp

– Compressor and motor directly coupled
– Motor protection IP 55 with PTC thermistors
– All components are integral but still easily accessible from the outside
– All service parts are accessible from the front
– Compressor unit isolated from mechanical vibration
– Hermetically sealed BOGE suction regulator with integrated solenoid valve ensures no load
starting and safe operation of all moving parts
– Minimal internal pressure loss due to the BOGE air end with optimised screw profile
fitted directly into a compact module
– Constant low oil carry-over in all operating phases
due to efficient pre-separation in the integral compressed air-oil separator
– Easy change oil separator cartridge and high efficiency oil filter via common access lid
– Valveless oil circuit
– No condensate in the oil due to thermostatically controlled oil cooler
– Compressed air aftercooler for low compressed air outlet temperatures
– Economical operating mode selection due to BOGE control, regulation
and monitoring systems with micro processor control and individual fault message displays
– Constant compression temperature and pressure display
– Precise pressure adjustment via keypad
– Anti-freeze protection for compressors up to -10°C
– Surface coating in light blue, RAL 5012
– Compressed air receiver polished and painted for extended service life,
handhole as inspection opening, with CE symbol
– Receiver according to EEC-directive 2009/105, manufactured according to AD-regulations 2000, with CE symbol
– Manifold complete with all necessary receiver fittings like type tested
safety valve, pressure gauge, relief valve with threaded test point
stop valve at the compressed air outlet, condensate manual drain valve
– BOGE refrigerant compressed air dryer for automatic operation and ready for connection and operation
– Low pressure loss for continuous energy savings
– Attached, automatically actuated condensate drain as standard

Technical Data:
Effective free air delivery of complete unit
measured according to PN2 CPT C2 and ISO 1217 Part C 0,73 m³/min
at maximum compressor overpressure 10 bar
Rated power of drive motor 5,50 kW
Protection type / Insulation class of the motor IP 55 / F
Operating voltage (compressor) 400 V / 50 Hz
Control voltage (compressor) 24 V AC / 24 V DC
Operating-/control voltage (dryer) 230 V / 50 Hz
Compressed air outlet temperature above ambient temperature 11 K
Cooling air volume flow (compressor) 1500,00 m³/h
Cooling air volume flow (dryer) 380,00 m³/h
Suction or ambient temperature (min...max) +5...+45 °C
Pressure dew point at inlet conditions according to DIN ISO 7183 +7 °C
Required power input of the dryer 0,15 kW
Residual oil content in compressed air 1...3 mg/m³
Receiver volume 270 l
Permissible maximum receiver pressure 11 bar

silenced version (acc. to dimensioned drawing): M 3200.0614
Unit sound pressure level (in accordance with DIN/PN8NTC2.3) 68 dB(A)
Width / Depth / Height 1700 / 590 / 1130 mm
Compressed air connection (ball valve) G 1/2
Weight 225,0 kg

Subject to technical modifications

BOGE-BASIC control

Features of the control system
– Automatic selection of the optimum operating mode by synchronisation
– Automatic optimisation of motor switching cycles
– Monitoring of pressure via pressure transmitter
– Network pressure adjusted from the keyboard
– Integral test function for outputs
– Messages via LC-Display / LEDs / contacts
– Run on time (for short operating times) adjustable via keypad
– Control voltages 230 V / 24 V AC
– Connection for Master Control System
– Non-resetting after power failure
– Auto-restart function after power failure selectable

Control elements
– ON button
– Off button
– EMERGENCY STOP button
– Info button
– Enter button

Displays
– Green LED 'Ready' indicator (steady light) and display
of 'soft' run down after manual switch off (flashing light)
– Final compression temperature
– Network pressure
– Load operation
– Idling
– Ready to operate
– Automatic selection of operating mode or continuous operation mode active
– Pressure control set to external
– Auto-restart function is active after power failure
– Operating hours - Total
– Operating hours - Idling
– Operating hours until next scheduled compressor service is due
– Operating hours until next motor service is due
– Load cycles until next receiver service due
– Load cycles until next suction regulator service due
– Function test for display elements
– Software-no.
– Warning message
– Red LED for fault messages (flashing light), maintenance (flickering light)



Monitoring as individual messages
– Max. service pressure too high
– Temperature too low (frost protection)
– Drive motor temperature outside limits
– Fault - network pressure transducer
– Single control button (On / Off / Info / Enter) defective
– Control save function defective

Messages
– Intermittent mode
– Continuous mode
– Ready to operate
– Operation
– Load operation
– Idling
– Lamp test

$ 5,500.00


Category: BOGE

Other Info

  • Year: Not specified
  • Status/Condition: Rebuilt
  • Width cm: Available on Request
  • Height cm: Available on Request
  • Total Kg: Available on Request

Pick Address
  • Region: Perth
  • State: AU
BOGE CAREPAC

BOGE Major Service Kits for C Series Compressors

2900001466P
2900001566P
290000166676P
2900001866P

alt

Price Negotiable


Valencia Way Maddington
Category: BOGE

Other Info

  • Year: 2014
  • Status/Condition: New
  • Dangerous Goods: No
  • Width cm: 30
  • Height cm: 30
  • Total Kg: 20

Pick Address
  • State: AU
Results 1 - 5 of 5